Lighting
Light above the mirror in the bathroom: height, light colour, IP rating
Mount the light above the mirror just above the top edge of the mirror and prepare the cable outlet a few centimetres above it. For a 60 cm wide mirror, a fixture 40 to 60 cm long is suitable, for a wider one a longer bar or two fixtures. Choose neutral white around 4000 K with CRI 90 and above, compare lumens and in zones near the bathtub and shower adhere to an IP rating of at least IPX4, for example IP44.

Illustrative image: black LED light above rectangular mirror above the sink
Ceiling lights shine from behind and above, so when you stand at the mirror, you are in your own shadow. Therefore, a separate light above the mirror is necessary to illuminate the face from above and in front. You can find an overview of all lights in the bathroom in the article Bathroom lighting, here we go into the details of the light above the mirror.
Types of lights above the mirror
| Light | Installation | What to consider |
|---|---|---|
| bar on the wall above the mirror | on the wall just above the mirror | needs a cable outlet above the mirror |
| light on the mirror | attaches to the top edge of the mirror | check the thickness of the mirror for which the holder is intended |
| light for the gallery | on the top edge of the mirror cabinet | some galleries have light already built-in |
| light with a swivel head or arm | on the wall above the mirror | the direction of the light can be adjusted towards the face |
| LED mirror with light built-in | you do not need a light | see Mirror with lighting |

How high and how long
The light sits just above the top edge of the mirror and shines slightly forward so that the light falls on the face, not just on the mirror. The height of the light thus depends on the height of the mirror – you can find a table with common mirror heights of 60, 70, and 80 cm and the lights above them in the article Bathroom lighting. Prepare the cable outlet a few centimetres above the planned top edge of the mirror so that it is not covered by the mirror and the light covers it.
| Width of mirror | Light above the mirror |
|---|---|
| up to 60 cm | light fixture 40 to 60 cm long, not longer than the mirror |
| 80 to 120 cm | longer bar or two lights |
| double sink with a shared mirror | one long bar or light above each sink |
The light should not be wider than the mirror. With a mirror placed high, for example for tall people, check that the light still shines on the face and not just on the crown. In such cases, a light with an adjustable direction or adding wall lights on the sides of the mirror can help.
Light colour and colour rendering
| Light temperature | How it feels | When |
|---|---|---|
| 2700 – 3000 K | warm white, cosy | evening, atmosphere, indirect light |
| around 4000 K | neutral white | light above the mirror – makeup, shaving |
| 5000 K and more | cool white | appears technical, skin looks pale |
Alongside the light temperature, the colour rendering index CRI (Ra) is important. With a CRI of 90 or higher, you see skin and makeup accurately; with a lower CRI, colours may appear less true to life. Some fixtures allow switching the light colour – neutral in the morning, warmer in the evening.

How much light: lumens
With LED lights, compare the luminous flux in lumens (lm). For example, the 40 cm LED light above the mirror Mereo has 7 W and 455 lm, the 60 cm version has 12 W and 780 lm, both with a colour of 4000 K and an IP44 rating. A longer light thus provides more light and spreads it over a wider area. If the manufacturer does not specify lumens, comparison is difficult – ask about them. With a dark wall tile that absorbs light, choose more lumens; more in the article Black and dark bathroom.
IP rating and zones
The IP code consists of two digits. The first indicates protection against foreign bodies and dust, while the second indicates protection against water. The letter X means that the relevant level of protection is not specified in the designation.
| IP rating | What it can withstand | Where in the bathroom |
|---|---|---|
| IP20, IP21 | only standard interior | outside zones 0, 1 and 2 |
| IPX4, IP44 | splashing water from all sides | zones 1 and 2, standard lights above the mirror |
| IPX5, IP65 | water jet | where the bathroom is cleaned by a stream of water, for example in public showers |
According to STN 33 2000-7-701, zone 1 above the bath or shower extends to a height of 225 cm (or to a higher fixed shower head), and for a level-access shower, it is 120 cm from the fixed water outlet; zone 2 is a strip 60 cm wide behind zone 1 at the bath and shower with a tray. If the sink is right next to the bath or shower, the light fixture above the mirror is often in zone 2 and requires at least IPX4. Whether the location is outside the zones will be determined by the electrician.
Outlet, switch and dimming
- Cable outlet – make it before tiling when you know the height and width of the mirror. It is difficult to move afterwards.
- Separate switch – you can turn on the light at the mirror without the main light, for example at night.
- Dimming – the LED light must be dimmable and the dimmer must be compatible. The manufacturer must explicitly state this.
- Sensor – the light above the mirror can also be turned on by a motion sensor, for example in a bathroom without a window.
- Power supply – low voltage lights have a power supply that must be placed according to the instructions and away from water.
- Residual current device of up to 30 mA protects all circuits in the bathroom.

Procedure: from selection to installation
- Select the mirror or gallery and determine their width and height.
- Select the light – length according to the mirror, lumens, light colour and rating.
- The electrician will make the outlet above the mirror and a separate switch, possibly a dimmer.
- The tiler will leave the outlet accessible and will cut the tiles around it precisely.
- Installation of the mirror and light, connection is done by the electrician.
You can find lights above the mirror in the online shop in the category Bathroom lighting. To see how neutral and warm light shines at the mirror, visit the studio in Senec at Bratislavská 71.
Common mistakes
- Only ceiling light – the face is in shadow at the mirror.
- Cable outlet behind the mirror – the light cannot be connected without cutting.
- Light with low rating near the bath – in zone 2 it must be at least IPX4.
- Cold light and low CRI – skin looks grey.
- Light shines on the mirror, not on the face – you see a reflection in the mirror, the face is dark.
Sources: STN 33 2000-7-701 (zones in the bathroom, IPX4 rating, 30 mA residual current device); EN 60529 (IP ratings); technical data for Mereo lights above the mirror (7 W, 455 lm and 12 W, 780 lm, 4000 K, IP44) according to vkupelni.sk; our articles Bathroom Lighting and Mirror for the Bathroom.
Terms in the dictionary: Mirror cabinet (gallery) · Double sink · Colour temperature of light · CRI (colour rendering) · IP rating · Electrical zones in the bathroom (zone 0, 1, 2)
Frequently Asked Questions
What height should the light be above the mirror?
Just above the top edge of the mirror and the cable outlet a few centimetres higher. The height depends on how high the mirror hangs.
What length of fixture above the mirror?
For a 60 cm wide mirror, a fixture 40 to 60 cm long, for an 80 to 120 cm mirror a longer bar or two fixtures. The fixture should not be wider than the mirror.
What light colour above the mirror?
Neutral white around 4000 K with a colour rendering index CRI 90 and above. Warm light 2700 to 3000 K is suitable for the evening and indirect lighting.
What IP rating must the light above the mirror have?
If it is in zone 1 or 2 near the bath or level-access shower, it must be at least IPX4, for example, IP44, and the manufacturer must specify it for this zone. Outside the zones, lower protection is sufficient, which will be assessed by the electrician.
How many lumens should the light above the mirror have?
It depends on the length and surroundings. For example, the Mereo fixture 40 cm long has 455 lm and the 60 cm long one has 780 lm. With dark wall tiles, choose more.
Can the light above the mirror be dimmed?
Yes, if the fixture is dimmable and the dimmer is compatible. The manufacturer must explicitly state this.
AI Advisor
Have a question on the topic? Ask the advisor – they will respond based on TGB Kúpeľne articles.
AI advisor – answers are generated by artificial intelligence from TGB Kúpeľne articles and may contain errors.
Bathroom design
These are tips. We will draw your bathroom for you.
In the 3D bathroom planner, you can design your bathroom yourself for free. We will prepare a custom visualisation with specific wall tiles for you in the studio – free of charge with your purchase.
Online design for free Custom visualisation
TGB Kúpeľne Studio · Bratislavská 71, Senec · Map













