Furniture and mirrors
Mirror with lighting: backlit, Hollywood and smart
A mirror with lighting can shine forward onto the face (front-lit), behind onto the wall (back-lit), with bulbs around the edge (Hollywood-style), or have touch control, dimming, heating, and a display (smart). For makeup and shaving, you need light that shines on the face, with neutral white around 4000 K and colour rendering CRI 90 and above. In zones 1 and 2, the mirror must have a rating of at least IPX4, for example IP44; outside the zones, the electrician will assess the rating according to the manufacturer's instructions.

Illustrative image: round LED mirror with even light above the sink in a darker bathroom
A mirror with lighting replaces both the mirror and the light above it at once. However, not every light in a mirror adequately illuminates the face – some mirrors mainly light up the wall and create atmosphere, while others are designed for makeup and shaving. We describe how to choose the size and height of the mirror in the article Mirror for the bathroom. Here, we focus on the light.
Types of mirrors with light
| Type | How it shines | Suitable for |
|---|---|---|
| front-lit LED mirror | through matte strips or areas in the mirror forward onto the face | daily washing, shaving, makeup |
| back-lit LED mirror | behind the mirror onto the wall, the mirror appears to float | atmosphere and night light, not enough for the face alone |
| both front-lit and back-lit | both, often with separate controls | bathroom where you want both working and dimmed light |
| Hollywood mirror | bulbs around the edge or on the sides | makeup, vanity table, bathroom away from water |
| smart mirror | LED light with electronics and additional features | for those who want dimming, light colour, heating, and a display |
| mirror with light | separate light above the mirror or on it | when you want to choose the mirror and light separately |
At the time of writing, the e-shop vkupelni.sk had over 250 LED mirrors from brands Lotosan, SAPHO, Mereo, and AQUALINE – square, round, and oval, with widths from 35 to 160 cm. The filter divides them into mirrors with lighting and back-lit.

Front-lit or back-lit
A front-lit mirror has light in the mirror surface – in strips on the sides, top, or around the entire edge. It shines directly on the face, making it a working light. The best illumination for the face comes from light on both sides or around the entire edge, where shadows do not form under the eyes and nose. A strip only at the top shines similarly to a light above the mirror.
A back-lit mirror shines onto the wall behind it. It looks impressive and is sufficient for a night trip to the toilet, but it only weakly illuminates the face. To use it as a working light at the sink, complement it with a light above the mirror or wall lights on the sides. We describe how to position them in the article Light above the mirror.
Hollywood mirror in the bathroom
A Hollywood mirror has bulbs around the edge or on the sides, like in theatre dressing rooms. It evenly illuminates the face from all sides, making it popular among those who frequently apply makeup. However, when selecting one for the bathroom, check the protection – many Hollywood mirrors are intended for vanity tables in bedrooms and do not have splash-proof protection. Choose only those approved by the manufacturer for bathroom use and position it according to zones. The bulbs should be LED with a matte finish, as bare bulbs can cause glare on the face.

Smart mirror: which features make sense
- Touch switch directly on the mirror – for example, some Mereo mirrors have LED light with a touch sensor.
- Dimming – softer light in the evening, full brightness in the morning. A good mirror remembers the last setting.
- Adjustable light colour – warm white in the evening, neutral for makeup, cooler in the morning.
- Heating (anti-fogging) – a film behind the mirror prevents fogging after a shower. We describe how it works in the article Mirror for the bathroom.
- Motion sensor – the light turns on automatically when you approach the sink.
- Clock, temperature, Bluetooth speaker – nice extras, but each additional feature is electronics that can fail.
- Cosmetic mirror with magnification built into a large mirror – or standalone, see Cosmetic mirror.
When it comes to a smart mirror, ask if the power source or controller can be replaced. For mirrors with fixed built-in LEDs, the replacement of LEDs depends on the construction – some can only be replaced by service, others cannot be replaced at all.
Light quality: Kelvin, CRI, and lumens
| Data | What it means | Recommendation for mirrors |
|---|---|---|
| light temperature (K) | light colour – lower number is warmer, higher number is cooler | around 4000 K, neutral white |
| CRI (Ra) | how accurately light shows colours | 90 and above – you see skin and makeup accurately |
| luminous flux (lm) | how much light the fixture emits | compare lumens, not watts |
Watts only indicate consumption. Two mirrors with the same power can shine completely differently. If the manufacturer does not specify lumens or CRI, ask about them before purchasing.

Electricity, protection and installation
- Rating – in zones 1 and 2 near the bath and shower, the light fixture and mirror must have a rating of at least IPX4, for example IP44, when exposed to water flow IPX5, and the manufacturer must specify it for the given zone. We describe the zones in the article Bathroom lighting.
- Connection – the mirror connects to the cable outlet behind the mirror. Its position is determined by the installation instructions, so choose the mirror before the electrician does the wiring.
- Switch – a mirror with touch control can be constantly powered, or you can switch it on with a wall switch. Discuss with the electrician how you want to control it.
- Residual current device with a rated residual current of no more than 30 mA must protect circuits in the bathroom according to STN 33 2000-7-701; exceptions (for example, SELV) will be assessed by the electrician.
- Weight – a large mirror with light is heavy, it requires reinforcement on drywall.
How to care for a mirror with light
Wipe the mirror with a soft cloth dampened with clean water or a mild glass cleaner. Spray the cleaner on the cloth, not directly on the mirror – it could seep into the mirror layer and electronics at the edges. Do not use abrasive or acidic cleaners.

You can find LED mirrors in the e-shop under the category LED Mirrors. To see how illuminated and backlit mirrors look in person, visit our studio in Senec at Bratislavská 71.
Common mistakes
- Only backlit mirror by the sink – looks nice, but the face is in shadow.
- Cold light with low CRI – skin looks grey and makeup appears different than in daylight.
- Hollywood mirror without protection – unsuitable for a damp bathroom.
- Cable outlet in the wrong place – the mirror covers the outlet in a different location than needed.
- Selection by watts – light is determined by lumens and CRI.
Sources: STN 33 2000-7-701 (zones in the bathroom, IPX4 protection, 30 mA residual current device); range of the LED mirrors category on vkupelni.sk (quantities, brands and sizes as of November 2026) and descriptions of Mereo mirrors (touch sensor, demisting); our articles Mirror for the Bathroom and Bathroom Lighting.
Related: Bathroom visualisation in-store or via artificial intelligence
Terms in the dictionary: Demisting the mirror · Colour temperature of light · CRI (colour rendering) · Electrical zones in the bathroom (zone 0, 1, 2) · IP protection · Nominal and actual size
Frequently Asked Questions
What is the difference between front-lit and backlit mirrors?
A front-lit mirror shines through the frosted areas in the mirror towards the face. A backlit mirror shines behind the mirror onto the wall, creating atmosphere but providing weak illumination for the face.
What light colour is suitable for a makeup mirror?
Neutral white around 4000 K with a colour rendering index (CRI) of 90 or more. This allows you to see skin and makeup accurately.
Is a Hollywood mirror suitable for the bathroom?
Only those that the manufacturer approves for bathroom use and have water splash protection. Many are designed for a dressing table in the bedroom.
What IP rating must an LED mirror have in the bathroom?
In zones 1 and 2 near the bath and shower, at least IPX4, for example, IP44. The placement will be assessed by an electrician according to STN 33 2000-7-701.
Is a heated mirror worth it?
In a bathroom where the mirror fogs up after a shower, yes. The film behind the mirror keeps the surface clear of steam.
Can the light in an LED mirror be replaced?
For permanently built-in LEDs, the LEDs themselves cannot be replaced. Before purchasing, ask if the power supply or controller can be replaced.
AI Advisor
Have a question on the topic? Ask the advisor – they will respond based on TGB Kúpeľne articles.
AI advisor – answers are generated by artificial intelligence from TGB Kúpeľne articles and may contain errors.
Bathroom design
These are tips. We will draw your bathroom for you.
In the 3D bathroom planner, you can design your bathroom yourself for free. We will prepare a custom visualisation with specific wall tiles for you in the studio – free of charge with your purchase.
Online design for free Custom visualisation
TGB Kúpeľne Studio · Bratislavská 71, Senec · Map













