Showers and Bathtubs
AQUATEK shower enclosures: series, trays, baths, and installation
AQUATEK shower enclosures from Topoľčany according to glass thickness 8, 6, and 4 mm, trays made of cast marble and polymer, baths, and installation rules according to the manufacturer's instructions.
AQUATEK is a brand of the Slovak company AQUATEK spol. s r.o. based in Topoľčany. The offering focuses on shower enclosures, shower doors and bath screens, shower trays, freestanding baths, and shower systems; the manufacturer presents sanitary ceramics on a separate website. The designation "modern Italian design" used by AQUATEK describes the style of the products. A complete overview of the brand can be found in the profile AQUATEK, this article focuses on the selection and installation of a shower enclosure.
Series of shower enclosures by glass thickness
The manufacturer classifies shower enclosures by glass thickness. This is practical for selection: the thickness of the glass determines how large the panels can be and how solid the enclosure will appear.
| When it suits | Glass | Series |
|---|---|---|
| large fixed panels, walk-in and frameless solutions | 8 mm | Jaguar, Infinity, Teknosoft, Tekno, Kosmos, Party, Crystal, VIP2000, Smart, Nobel, Admiral, Better, Extra, X-Factor, Zeus, Oasis, Oasis Black, Open, Open Black, Happy, Happy Black |
| standard sliding, hinged and bi-fold doors | 6 mm | Wellness, Wellness Black, Glass, Dynamic, Master, Yes, Yes Black, Holiday, Family, Ability, Ability Black |
| lighter constructions without large glass surfaces | 4 mm / 2,2 mm Krilex | Royal, Lux (glass 4 mm or Krilex plastic 2,2 mm) |
The thickness of the glass alone does not determine quality – hinges, door tracks and seals are equally important. However, for a walk-in panel or large fixed glass, 8 mm glass is a common choice as it is stiffer. Black profiles have series marked as Black, such as Oasis Black, Open Black, Happy Black, Wellness Black, Yes Black, and Ability Black. The difference between framed and frameless constructions is explained in the article Frameless or framed shower enclosures.
Trays and freestanding baths
AQUATEK shower trays are made of cast marble or reinforced polymer. The differences between the materials are compared in the article Shower tray made of cast marble or acrylic? When ordering, check that the enclosure and tray fit in shape and size: a quarter-circle enclosure needs a tray with the same radius, and for a rectangular enclosure, the left or right version also matters.
AQUATEK freestanding baths are made of acrylic or cast stone, and the manufacturer also offers a freestanding bath mixer. Water supplies need to be prepared in the floor during the rough construction – it cannot be done later without demolition.
Installation according to the manufacturer's instructions
The AQUATEK installation manual contains rules worth knowing before tiling:
- First the tiles, then the enclosure. Masonry walls must be tiled down to the floor. If you embed the tray under the tiles, the enclosure will exceed its dimensions and cannot be installed.
- Dry assembly. The enclosure is assembled without silicone and sealed only after the installation is complete. Only exceptionally are parts that cannot be drilled glued.
- Silicone only on the outside. Each AQUATEK enclosure is sealed with sanitary neutral silicone (transparent or white) only on the outside. Sealing from the inside is prohibited by the manufacturer: water could accumulate in the profiles and overflow.
- Strips by the tray. Decorative strips for sealing the tray must not touch the inner side of the profiles at the wall, ending approximately 2 cm before the profile.
- Installation on the floor tiles. If the enclosure stands directly on the floor tiles, the manufacturer recommends applying a thin layer of neutral silicone to the bottom edges of the fixed glass parts a day in advance, which will create a protective layer on the glass.
- Careful with the glass. Place glass parts on cardboard or fabric, not directly on the floor tiles. According to the manufacturer, installation should not continue without the installation manual for the specific model.
The preparation of the space – flatness of the walls, waterproofing and drainage – is discussed in the article What to prepare before installing a shower enclosure. If you plan a walk-in panel without a tray, the floor gradient and type of drainage are explained in the chapter Drainage and gradients.
What to check before ordering
- the actual dimension of the corner or niche after tiling and the installation range of the enclosure,
- the thickness of the glass and whether the glass has a water-repellent treatment (see protective treatments for shower glass),
- the direction of opening and for rectangular enclosures the left or right version,
- the suitable tray or method of installation on the floor tiles,
- the availability of replacement seals and rollers for the given series.
Related: AQUATEK – brand profile · Shower enclosures MEREO · Shower enclosures SAPHO · Comparison of shower enclosure manufacturers · Aquatek in the e-shop vkupelni.sk
Frequently Asked Questions
Where is the AQUATEK brand from?
AQUATEK is a brand of AQUATEK spol. s r.o. based in Topoľčany, Slovakia. The designation "modern Italian design" used by the manufacturer describes the style of the products.
How is the AQUATEK shower enclosure sealed?
According to the manufacturer's installation instructions, the enclosure is first assembled dry, and after assembly, it is sealed with neutral sanitary silicone only from the outside. Sealing from the inside is prohibited by the manufacturer.
What thickness of glass do AQUATEK shower enclosures have?
According to the series, 8 mm, 6 mm, or 4 mm. The Royal and Lux series come with 4 mm glass or with a 2.2 mm plastic filling Krilex.
AI Advisor
Have a question on the topic? Ask the advisor – they will respond based on TGB Kúpeľne articles.
AI advisor – answers are generated by artificial intelligence from TGB Kúpeľne articles and may contain errors.
Bathroom design
These are tips. We will draw your bathroom for you.
In the 3D bathroom planner, you can design your bathroom yourself – for free and without registration. If you want assurance, we will prepare a photorealistic custom visualisation based on actual dimensions and specific tiles in the studio. It's free with a purchase.
Online design for free Custom visualisation
TGB Kúpeľne Studio · Bratislavská 71, Senec · Mon–Fri 8:00–12:00 and 12:30–17:00, Sat 9:00–12:00 · Map
